The ST-150 is a 1/8 inch, Class A PRT (Platinum Resistance Thermometer) with an IP67 rating. White heat shrink is used on the cable behind the PRT to minimize heat transfer to the sensor. PRT sheath dimensions are 3 mm diameter and 65 mm length, miminzing thermal mass.
FOR MORE PRODUCT INFORMATION, CHECK OUT THESE LINKS
MORE INFORMATION ON APOGEE TEMPERATURE SENSORS >>58必威网
Current Stock:
Measurement Range
-50 to 70 C
Measurement Uncertainty
0.3 C (-50 to 70 C), Class A
Measurement Repeatability
Less than 0.01 C
Long-term Drift
Less than 0.05 C per year
Time Constant ( time for detector signal to reach 63 % following a step change)
32 seconds
Self-heating
Less than 0.01 C (typical, assuming pulsed excitation of 2.1 V DC), 0.09 at 5 C (max. assuming continuous input excitation of 2.1 V DC)
Operating Environment
-50 to 70 C; 0 to 100 % relative humidity
Resistance at 0 C
100 Ω
Input Voltage Requirement
Datalogger dependent
Output Voltage Requirement
Datalogger dependent
电流消耗
Datalogger dependent
Dimensions
57.15 mm, 3.18 mm diameter
Mass
95 g
Warranty
4 years against defects in materials and workmanship
